基于模型诊断的候选空间单调性研究

doi:10.13196/j.cims.2013.12.wangxiao.3043.6.20131215

摘要/Abstract

摘要： 为了通过增加测量点、从候选诊断空间中找出真正的故障元件集,深入研究了测量点的选择优化问题,通过逻辑推理与验证的方法,分析了候选诊断空间大小随新测量点的单调性变化的关系,并给出了可以导致候选诊断空间单调递增或单调递减的测量点特征。同时证明了增加相关测量点可导致诊断空间单调递减,为进一步选择优化的测量点提供了基本理论依据。

关键词: 基于模型的诊断, 候选空间, 单调性, 测量点, 故障诊断

Abstract: To find the real fault component set in the candidate diagnostic space by gradually adding new more measurement points,the optimization problem of choosing suitable measurement points was studied deeply,and the monotonicity of the candidate diagnostic space’s size on the new measurement point was analyzed.The characteristics of measurement points which could lead to monotonic increasing or monotonic decreasing of candidate diagnoses space was given.It provided a basic theoretical foundation for the optimization of practical measurement point selection.

Key words: model-based diagnosis, diagnostic space, monotonicity, measurement point, fault diagnosis

中图分类号:

TP31

王肖,赵相福. 基于模型诊断的候选空间单调性研究[J]. , DOI: 10.13196/j.cims.2013.12.wangxiao.3043.6.20131215.

WANG Xiao,ZHAO Xiang-fu. Monotonicity of candidate space in model-based diagnosis[J]. , DOI: 10.13196/j.cims.2013.12.wangxiao.3043.6.20131215.

参考文献

［1］OUYANG Dantong,ZHANG Liming,ZHAO Jian,et al.Solving model-based fault diagnosis with flag propagation［J］.Chinese Journal of Scientific Instrument,2011,32(12):2857-2862(in Chinese).［欧阳丹彤,张立明,赵剑,等.利用标志传播求解基于模型的故障诊断［J］.仪器仪表学报,2011,32(12):2857-2862.］
[2]HAN Xu,SHI Zhongzhi,LIN Fen.The research and development on model-based diagnosis［J］.High Technology Communication,2009,19(5):543-550(in Chinese).［韩旭,史忠植,林芬.基于模型诊断的研究进展［J］.高技术通讯,2009,19(5):543-550.］
[3]ZHANG Xuenong,JIANG Yunfei,CHEN Aixiang,et al.A gradual approach for model-based diagnosis［J］.Journal of Software,2008,19(3):584-593(in Chinese).［张学农,姜云飞,陈蔼祥,等.基于模型诊断的分步求解［J］.软件学报,2008,19(3):584-593.］
[4]CHEN Aixiang,CHEN Qingliang,PAN Jiuhui,et al.Fast diagnosing through diagnostic graph analysis［J］.Chinese Journal of Computers,2009,32(8):1470-1485(in Chinese).［陈蔼祥,陈清亮,潘久辉,等.通过诊断图分析的快速诊断算法［J］.计算机学报,2009,32(8):1470-1485.］
[5]NYBERG M.A generalized minimal hitting-set algorithm to handle diagnosis with behavioral modes［J］.IEEE Transactions on Systems,Man and Cybernetics,Part A:Systems and Humans,2011,41(1):137-148.
[6]ZHANG Liming,OUYANG Dantong,ZHAO Xiangfu.Model diagnosis based on failure behavior［J］.Computer Integrated Manufacturing Systems,2008,14(9):1845-1849(in Chinese).［张立明,欧阳丹彤,赵相福.基于故障行为的模型诊断方法［J］.计算机集成制造系统,2008,14(9):1845-1849.］
[7]DE KLEER J.Hitting set algorithms for model-based diagnosis［EB/OL］.［2013-07-03］.http://www.st.ewi.tudelft.nl/~abreu/DX2011/papers/dx2011_37.pdf.
[8]TANG Baoping,XI Jianmin,LI Feng.Fault diagnosis for rotating machinery based on elman neural network［J］.Computer Integrated Manufacturing Systems,2010,16(10):2148-2152(in Chinese).［汤宝平,习建民,李锋.基于Elman 神经网络的旋转机械故障诊断［J］.计算机集成制造系统,2010,16(10):2148-2152.］
[9]OUYANG Dantong,OUYANG Jihong,LIU Dayou.The research and new development on model-based diagnosis［J］.Acta Scientiarum Naturalium Universitatis Jilinensis,2001(2):38-45(in Chinese).［欧阳丹彤,欧阳继红,刘大有.基于模型诊断的研究与新进展［J］.吉林大学自然科学学报,2001(2):38-45.］
[10]DE KLEER J.Using crude probability estimates to guide diagnosis［J］.Artificial Intelligence,1990,45(3):381-391.
[11]DE KLEER J,RAIMAN O,SHIRLEY M.One-step look-ahead is pretty good［M］//Readings in Model-Based Diagnosis.Los Altos,Cal.,USA:Morgan Kaufmann,1992:138-142.
[12]LIN Kongyuan,YANG Zhengling.An expected entropy approach to optimal measurements in model-based diagnosis［J］.Journal of Tianjin University,1992,27(4):394-402(in Chinese).［林孔元,杨正瓴.模型故障诊断中测量点优选的一类期望熵法［J］.天津大学学报,1992,27(4):394-402.］
[13]YU Baisheng,HUANG Wenhu.An evaluation approach to optimal measurements in model-based diagnosis［J］.Journal of Harbin Institute of Technology,1998,30(1):6-10(in Chinese).［于百胜,黄文虎.基于模型故障诊断中测点优选的一种评估方法［J］.哈尔滨工业大学学报,1998,30(1):6-10.］
[14]ZHOU Yuliang,HE Guangjun,WU Jianfeng,et al .An optimal method of selecting test point based on rule of maximum fault diagnosis information value［J］.Journal of Projectiles,Rockets,Missiles and Guidance,2010,30(5):230-232(in Chinese).［周玉良,何广军,吴建峰,等.基于最大故障诊断信息量准则的测试点优选方法［J］.弹箭与制导学报,2010,30(5):230-232.］
[15]YANG Lu,SHEN Huairong.An optimized met hod of test point fast design［J］.Acta Armamentarii,2007,28(3):349-352(in Chinese).［杨露,沈怀荣.测试点设计的一种快速优化方法［J］.兵工学报,2007,28(3):349-352.］
[16]JIANG Ronghua,WANG Houjun,LONG Bing.Test selection based on binary particle swarm optimization［J］.Journal of Electronic Measurement and Instrument,2008,22(2):11-15(in Chinese).［蒋荣华,王厚军,龙兵.基于离散粒子群算法的测试选择［J］.电子测量与仪器学报,2008,22(2):11-15.］
[17]PAN Yuxiong,LI Qingdong, REN Zhang.Measurement point optimization strategy of model-based fault diagnosis expert system［J］.Journal of Southeast University:Natural Science Edition,2013,43(7):98-101(in Chinese).［潘宇雄,李清东,任章.基于模型的故障诊断专家系统测点优选策略［J］.东南大学学报:自然科学版,2013,43(7):98-101.］
[18]REITER R.A theory of diagnosis from first principles［J］.Artificial Intelligence,1987,32(1):57-96. ［19］DE KLEER J.An assumption-based tms［J］.Artificial Intelligence,1986,28(2):127-162. ［20］GENESERETH M R.The use of design descriptions in automated diagnosis［J］.Artificial Intelligence,1984,24(1/2/3):411-436.

[1]	付松,钟诗胜,林琳,张永健. 基于迁移学习的民航发动机小样本故障诊断[J]. 计算机集成制造系统, 2021, 27(12): 3450-3461.
[2]	王欢,张春,张宁,陈耀华. 具有强泛化性的高铁逆变器开路故障诊断算法[J]. 计算机集成制造系统, 2021, 27(11): 3236-3246.
[3]	徐彦伟,蔡薇薇,颉潭成,陈立海,刘明明. 变工况下基于信息融合的地铁牵引电机轴承故障智能诊断[J]. 计算机集成制造系统, 2021, 27(11): 3247-3258.
[4]	孙晨,文龙,李新宇,高亮,丛建臣. 基于自动机器学习的不平衡故障诊断方法[J]. 计算机集成制造系统, 2021, 27(10): 2837-2847.
[5]	刘鹏程,孙林夫,张常有,王波. 基于交互注意力机制网络模型的故障文本分类[J]. 计算机集成制造系统, 2021, 27(1): 73-90.
[6]	彭成,贺婧,唐朝晖,陈青,桂卫华. 基于双维度EKNN的滚动轴承早期故障分类算法[J]. 计算机集成制造系统, 2021, 27(1): 91-102.
[7]	张文龙,胡天亮,王艳洁,魏永利. 云/边缘协同的轴承故障诊断方法[J]. 计算机集成制造系统, 2020, 26(第3): 589-599.
[8]	刘华一,鄢萍,周强,辛洋,张自凯,潘吉财. 基于语义网的机床故障诊断知识扩展方法[J]. 计算机集成制造系统, 2020, 26(第3): 609-622.
[9]	张卫贞1,曾建潮2,石慧1,董增寿1. 基于核密度估计的实时剩余寿命预测[J]. 计算机集成制造系统, 2020, 26(7): 1794-1801.
[10]	辜振谱,刘晓波,韩子东,洪连环. 基于改进密度峰值聚类的航空发动机故障诊断[J]. 计算机集成制造系统, 2020, 26(5期): 1211-1217.
[11]	张珊珊,李方义,贾秀杰,周丽蓉,刘浩华,张传伟,孔琳. 面向变速箱磨损状态评估的灰靶模型优化[J]. 计算机集成制造系统, 2019, 25(第9): 2159-2166.
[12]	赵宏宇,沈江,安邦. 基于代价敏感方法的智能制造故障诊断[J]. 计算机集成制造系统, 2019, 25(第9): 2180-2187.
[13]	宋亚,夏唐斌,郑宇,卓鹏程,潘尔顺. 基于Autoencoder-BLSTM的涡扇发动机剩余寿命预测[J]. 计算机集成制造系统, 2019, 25(第7): 1611-1619.
[14]	马越,陈捷,洪荣晶,潘裕斌. 多传感器数据融合的风电齿轮箱性能衰退评估[J]. 计算机集成制造系统, 2019, 25(第2): 318-325.
[15]	付宇,殷逸冰,冒慧杰,左洪福,冯正兴. 基于静电监测和神经网络的航发典型故障诊断[J]. 计算机集成制造系统, 2019, 25(第11): 2852-2862.