面向全寿命周期技术状态管理的航空发动机AMRO支持系统

doi:10.13196/j.cims.2013.12.lilianhui.3087.12.20131220

摘要/Abstract

摘要： 为解决面向全寿命周期的航空发动机技术状态数字化管理问题,分析了信息资源流通不畅、完整度低、重用效能不高的原因,将装配与维护、维修、大修结合起来,提出航空发动机装配/维护/维修/大修支持系统整体框架。根据全寿命周期技术状态数据的逻辑结构和业务活动管理的特点,分别建立了统一的技术状态数据模型和工作流Agent驱动的业务过程模型,研究了在线培训与支持、数据集成与同步等关键技术。开发了原型系统,验证了方案的有效性。

关键词: 航空发动机, 全寿命周期, 装配/维护/维修/大修, 技术状态管理

Abstract: To solve the digitalized management problem of aero-engine configuration in whole lifecycle,the reason of poor circulation,low integrity and low reuse efficiency of information resource was analyzed.With the combination of Assembly and Maintenance,Repair and Overhaul (AMRO),an entire framework of aero-engine AMRO supporting system was proposed.Unified configuration data model and workflow-agent driven process model were established based on the logical structure of whole lifecycle configuration data model and the features of operational activities management.Other technical points,such as online education support,data integration and synchronization were researched.A prototype system was developed and the effectiveness of the program was verified.

Key words: aero-engine, whole lifecycle, assembly and maintenance, repair and overhaul/operation, configuration management

中图分类号:

TP391
TH16

李联辉,莫蓉+,常智勇,孙惠斌,万能,乔虎,向颖. 面向全寿命周期技术状态管理的航空发动机AMRO支持系统[J]. , DOI: 10.13196/j.cims.2013.12.lilianhui.3087.12.20131220.

LI Lian-hui,MO Rong+,CHANG Zhi-yong,SUN Hui-bin,WAN Neng,QIAO Hu,XIANG Ying. Aero-engine AMRO support system for whole lifecycle configuration management[J]. , DOI: 10.13196/j.cims.2013.12.lilianhui.3087.12.20131220.

参考文献

［1］LIU Jianhua,BAI Shuqing,DUAN Hua,et al.Computer aided assembly process control method for manual assembly［J］.Computer Integrated Manufacturing Systems,2009,15(12):2391-2395 (in Chinese).［刘检华,白书清,段华,等.面向手工装配的计算机辅助装配过程控制方法［J］.计算机集成制造系统,2009,15(12):2391-2395.］
[2]SUN Huibin,CHANG Zhiyong.Solution of MRO support system for large complex equiqment［J］.Aeronautical Manufacturing Technology,2009(16):74-78 (in Chinese).［孙惠斌,常智勇.航空发动机装配技术状态数据模型研究［J］.航空制造技术,2009(16):74-78.］
[3]ZHANG Jiapeng,LIU Jianhua,NING Ruxin.Workflow-based product assembly process generation and information integration technology［J］.Mechanical Science and Technology for Aerospace Engineering,2010,29(9):1145-1151 (in Chinese).［张佳朋,刘检华,宁汝新.基于工作流的产品装配工艺生成及信息集成技术研究［J］.机械科学与技术,2010,29(9):1145-1151.］
[4]MASON M T.Compliance and force control for computer controlled manipulators［J］.IEEE Trans on Systems,Man,and Cybenetics,1981,11(6):418-432.
[5]RAIBERT M H,CARIG J J.Hybrid position/force control of manipulators［J］.Journal of Dynamic Systems,Measurement and Control,Transactions of the ASME,1981,103(2):126-133.
[6]REN Genquan,ZHANG Jun,ZHANG Li,et al.Information resources organizing-oriented design and analyzing of maintenance BOM［J］.Computer Integrated Manufacturing Systems,2010,16(7):1545-1551 (in Chinese).［任艮全,张君,张力,等.面向信息资源管理的维修BOM结构设计与分析［J］.计算机集成制造系统,2010,16(7):1545-1551.］
[7]REN Genquan,ZHANG Li,WANG Jianmin.Data provenance tracking of BOM in maintenance phase of product［J］.Computer Integrated Manufacturing Systems,2010,16(10):2187-2195 (in Chinese).［任艮全,张力,王建民.产品维修阶段BOM数据起源研究［J］.计算机集成制造系统,2010,16(10):2187-2195.］
[8]WEI Zhiqiang,WANG Xiankui,WU Dan,et al.BOM multi-view mapping of product based on a single data source［J］.Journal of Tsinghua University:Science& Technology,2002,42(6):802-805 (in Chinese).［魏志强,王先逵,吴丹,等.基于单一数据源的产品BOM多视图映射技术［J］.清华大学学报:自然科学版,2002,42(6):802-805.］
[9]WANG Jianmin,REN Genquan,ZHANG Li,et al.Maintenance repair and overhaul/operations support technology［J］.Computer Integrated Manufacturing Systems,2010,16(10):2017-2025 (in Chinese).［王建民,任艮全,张力,等.MRO支持技术研究［J］.计算机集成制造系统,2010,16(10):2017-2025.］
[10]CHENG Yao’an,ZHANG Li,LIU Yingbo,et al.Solution of MRO support system for large complex equiqment［J］.Computer Integrated Manufacturing Systems,2010,16(10):2026-2037(in Chinese).［程曜安,张力,刘英博,等.大型复杂装备MRO系统解决方案［J］.计算机集成制造系统,2010,16(10):2026-2037.］

[1]	张玉金,黄博,廖文和. 面向场景的航空发动机基于模型的系统工程设计[J]. 计算机集成制造系统, 2021, 27(11): 3093-3102.
[2]	付宇,殷逸冰,冒慧杰,左洪福,冯正兴. 基于静电监测和神经网络的航发典型故障诊断[J]. 计算机集成制造系统, 2019, 25(第11): 2852-2862.
[3]	聂兆伟,熊丹丹. 航空发动机叶片自适应修复目标曲面重构[J]. 计算机集成制造系统, 2019, 25(第1): 53-60.
[4]	杜党党,贾晓亮,王卓. 基于故障彩色图谱的航空发动机故障模式识别[J]. 计算机集成制造系统, 2018, 24(第9): 2297-2305.
[5]	陈志英,刘勇,周平,刘广通. 基于改进田口试验法的装配公差分析[J]. 计算机集成制造系统, 2018, 24(第5): 1200-1206.
[6]	柳强,焦国帅. 基于改进NSGA-Ⅱ的航空发动机管路多目标布局优化[J]. 计算机集成制造系统, 2018, 24(第5): 1217-1227.
[7]	陈振,贾晓亮. 不确定条件下航空发动机大修周期预测方法[J]. 计算机集成制造系统, 2018, 24(第2): 281-289.
[8]	周金华,任军学,蔡菊. 基于RBF神经网络的航空叶片铣削残余应力预测[J]. 计算机集成制造系统, 2018, 24(第2): 361-370.
[9]	李联辉,尹冠飞,莫蓉. 面向航空发动机装配过程的信息追溯与过程监控[J]. 计算机集成制造系统, 2018, 24(第12): 2986-3000.
[10]	张军锋,史耀耀,蔺小军,段继豪,张宏基,李志山. 基于灰色关联分析的叶片砂带抛光参数优化[J]. 计算机集成制造系统, 2017, 23(第4期): 806-814.
[11]	淮文博,史耀耀,唐虹,蔺小军,张溦. 砂布轮抛光叶片表面粗糙度预测与参数优化[J]. 计算机集成制造系统, 2017, 23(第12): 2708-2718.
[12]	王辉,周明星,余杰,王文宇,黄博浩,融亦鸣. 航空发动机叶片保形加工中的定位误差数值建模与分析[J]. 计算机集成制造系统, 2016, 22(第9期): 2118-2126.
[13]	姜天华,严洪森. 面向航空发动机装配车间知识化制造系统自进化[J]. 计算机集成制造系统, 2015, 21(第12期): 3222-3230.
[14]	杜党党,贾晓亮,郝超博. 基于遗传过程神经网络算法的航空发动机健康状态图谱化预测方法[J]. 计算机集成制造系统, 2015, 21(第11期): 2980-2987.
[15]	付旭云,陕振勇,李臻,钟诗胜. 时变模糊神经网络及其在航空发动机排气温度预测中的应用[J]. 计算机集成制造系统, 2014, 20(4): 919-.