基于语义的民用飞机总装工艺数据建模

• 论文 •

基于语义的民用飞机总装工艺数据建模

王海燕1,2,倪炎榕1,2,郑宇1,2,陆敏3,习俊通1,2,4

1.上海交通大学机械与动力工程学院,2.上海交通大学上海市网络化制造与企业信息化重点实验室,3.中国商飞上海飞机制造有限公司,4.上海交通大学机械系统与振动国家重点实验室

收稿日期:2013-11-25 修回日期:2013-11-25 出版日期:2013-11-25 发布日期:2013-11-25

Semantic-based final assembly process plan data modeling of civil aircraft

WANG Hai-yan1,2,NI Yan-rong1,2,ZHENG Yu1,2,LU Min3,XI Jun-tong1,2,4

1.School of Mechanical Engineering,Shanghai Jiaotong University,2.Shanghai Key Laboratory of Advanced Manufacturing Environment,Shanghai Jiaotong University,3.Shanghai Aircraft Manufacturing Co.,Ltd.,Commercial Aircraft Corporation of China,4.State Key Laboratory of Mechanical System and Vibration,Shanghai Jiaotong University

Received:2013-11-25 Revised:2013-11-25 Online:2013-11-25 Published:2013-11-25

摘要/Abstract

摘要： 为保证总装阶段信息传输的快速性和准确性,基于本体建立了民机总装工艺多层次统一数据定义模型,将制造物料清单由单一结构转变为柔性组合结构,全面展示装配结构、工艺、制造资源、生产管理等内部及相互关联关系。基于语义网络建立了总装工艺数据关联模型,以实现局部领域本体内关联以及领域本体顶层关联,保证总装工艺相关各类数据的一致性维护。在此基础上进行了相关软件开发,并已应用于国内某大型飞机制造公司的工艺数据管理中,取得了良好的效果。

关键词: 民用飞机, 总装工艺, 数据管理, 制造物料清单, 本体, 语义网络

Abstract: To ensure the rapidity and accuracy of information transmission in final assembly stage,the multi-level unified data definition model for civil aircraft final assembly process based on ontology was built.Through transferring the single structure of Manufacturing Bill Of Material (MBOM) into flexible combination structure,the internal and mutual relationship among assembly structure,process,manufacturing resources and production management were fully displayed.The assembly process plan data association model based on semantic network was set up,by which the association inside the local field ontology and the top association in the domain ontology were realized.The consistency maintenance among all kinds of assembly process related data was ensured.On this basis,the related software development had been applied in a domestic large aircraft company process plan data management and obtained a good effect.

Key words: civil aircraft, final assembly process, data management, manufacturing bill of material, ontology, semantic network

中图分类号:

TH166

王海燕1,2,倪炎榕1,2,郑宇1,2,陆敏3,习俊通1,2,4. 基于语义的民用飞机总装工艺数据建模[J]. .

WANG Hai-yan1,2,NI Yan-rong1,2,ZHENG Yu1,2,LU Min3,XI Jun-tong1,2,4. Semantic-based final assembly process plan data modeling of civil aircraft[J]. .

参考文献

［1］JIA Xiaoliang,ZHANG Zhenming,TIAN Xitian,et al.The Research of manufacturing process planning data management adopts MBOM as core［J］.Manufacturing Automation,2006,28(5):20-23(in Chinese).［贾晓亮,张振明,田锡天,等.以制造BOM为核心的制造工艺数据管理研究［J］.制造业自动化,2006,28(5):20-23.］
[2]MA Mingxu,FAN Yushun,YIN Chaowan.The formal modeling of product whole lifecycle based on the structure［J］.Chinese Journal of Mechanical Engineering,2006,42(9):83-90(in Chinese).［马明旭,范玉顺,尹朝万.基于产品结构的全生命周期形式化建模［J］.机械工程学报,2006,42(9);83-90.］
[3]OUERTANI M Z,DANNIE D.Traceability and management of dispersed product knowledge during design and manufacturing［J］.Computer-Aided Design,2011,43(5);546-562.
[4]TOZAWA Y,YOTSUKURA M.Integration of bills of material towards a communication tool［C］//Proceedings of 2009 WRI World Congress on Computer Science and Information Engineering.Washington,D.C.,USA:IEEE,2009,5;446-450.
[5]SEBASTIEN G,CLEMENT F.Application of the CMII model to an integrated engineering and manufacturing development environment［J］.International Journal of Interactive Design and Manufanufacturing,2007,1(1):5-13.
[6]PALMA P,CORCHO O,GMEZ-PREZ A,et al.A holistic approach to collaborative ontology development based on change management［J］.Science,Services and Agents on the World Wide Web,2011,9(3):299-314.
[7]LI Yingguang,YAN Ruijie,JIAN Jianbang.A semantics-based approach for collaborative aircraft tooling design［J］.Advanced Engineering Informatics,2010,24(2);149-158.
[8]ZHAO Rujia.Computer aided process planning［M］.Beijing;China Machine Press,1955:20-28(in Chinese).［赵汝嘉.计算机辅助工艺设计(CAPP)［M］.北京:机械工业出版社,1995:20-28.］
[9]BOCK C,ZHA Xuanfang,SUH H W,et al.Ontological product modeling for collaborative design［J］.Advanced Engineering Informatics,2010,24(4):510-524.
[10]MATSOKIS A,KIRITSIS D.An ontology-based approach for product lifecycle management［J］.Computers in Industry,2010,61(8):787-797.

[1]	阴艳超,张晟博,廖伟智,徐凯. 资源组件驱动的装配工具匹配推理方法[J]. 计算机集成制造系统, 2021, 27(7): 1981-1992.
[2]	徐赐军,田柳,李炜龙,黄松林. 基于机械结构形态的三维CAD模型检索[J]. 计算机集成制造系统, 2021, 27(6): 1650-1661.
[3]	王昊琪,李浩,文笑雨,罗国富. 本体驱动的复杂产品系统设计信息重用框架[J]. 计算机集成制造系统, 2021, 27(6): 1662-1672.
[4]	张佳朋,刘检华,龚康,张川,庄存波,赵本华. 基于数字孪生的航天器装配质量监控与预测技术[J]. 计算机集成制造系统, 2021, 27(2): 605-616.
[5]	万峰,邢香园,吴剑锋,赵文浩,王治,陈瑞启. 基于数字孪生的卫星总装过程管控系统[J]. 计算机集成制造系统, 2021, 27(2): 631-641.
[6]	刘华一,鄢萍,周强,辛洋,张自凯,潘吉财. 基于语义网的机床故障诊断知识扩展方法[J]. 计算机集成制造系统, 2020, 26(第3): 609-622.
[7]	徐赐军,李炜龙,黄松林. 机械结构形态知识融合[J]. 计算机集成制造系统, 2020, 26(8): 2190-2201.
[8]	安敬民,李冠宇,张冬青,蒋伟. 面向序贯决策中异常情景下交互问题处理方法[J]. 计算机集成制造系统, 2020, 26(12): 3274-3282.
[9]	万毕乐,贺文兴,陈畅宇. 面向航天器总体装配的工艺数字样机可视化自动构建方法及系统[J]. 计算机集成制造系统, 2018, 24(第6): 1337-1344.
[10]	钟艳如,姜超豪,覃裕初,杨国宇,黄美发. 基于本体的装配序列自动生成[J]. 计算机集成制造系统, 2018, 24(第6): 1345-1356.
[11]	王昊琪,吕振宇,张旭,唐承统. 面向公差分析的几何尺寸和公差语义信息翻译[J]. 计算机集成制造系统, 2018, 24(第4): 994-1006.
[12]	王蕾,夏绪辉,曹建华,刘翔. 再制造服务需求动态获取方法及应用[J]. 计算机集成制造系统, 2018, 24(第3): 781-792.
[13]	阴艳超,常斌磊,姬常杰. 转轮叶片多轴铣削加工的集成知识云服务实现[J]. 计算机集成制造系统, 2018, 24(第2): 349-360.
[14]	施昭,曾鹏,于海斌. 基于本体的制造知识建模方法及其应用[J]. 计算机集成制造系统, 2018, 24(第11): 2653-2664.
[15]	徐赐军,黄松林,王向杰. 机械结构形态提取方法[J]. 计算机集成制造系统, 2018, 24(第11): 2857-2866.