基于Deffuant模型的领先用户意见一致性研究

• 论文 •

基于Deffuant模型的领先用户意见一致性研究

张磊，李志蜀，王永锋，孙亚飞，邱树雄

1.四川大学计算机学院，四川成都610064；2.重庆大学机械工程学院，重庆400030

出版日期:2011-10-15 发布日期:2011-10-25

Lead user opinion consensus based on Deffuant model

ZHANG Lei, LI Zhi-shu, WANG Yong-feng, SUN Ya-fei, QIU Shu-xiong

1.College of Computer Science, Sichuan University, Chengdu 610064, China;2.College of Mechanical Engineering, Chongqing University, Chongqing 400030, China

Online:2011-10-15 Published:2011-10-25

摘要/Abstract

摘要： 为更好地分析客户协同产品创新设计平台中领先用户的意见一致性的形成过程，提出了一种新的基于有限信任Deffuant模型的意见一致性演化模型。分析了客户协同产品创新设计和有限信任模型的原理，构建了客户协同产品创新平台中领先用户的意见一致性模型框架；将Deffuant模型应用到客户协同产品创新设计平台，并对该模型算法在意见一致性的形成和网络结构的变化两个方面进行了改进；通过应用模拟测试，对算法的性能进行了测试和分析。实验结果表明，集团的意见将会对领先用户意见的演化过程产生影响，使得领先用户意见趋于统一的概率明显增加。

关键词: 客户协同, 领先用户, 有限信任模型, Deffuant模型, 意见一致性

Abstract: To analyze the formation of lead user opinion consensus in Customer Collaborative Product Innovation (CCPI) platform, a new opinion consensus model based on bounded confidence Deffuant model was proposed. The mechanisms for both CCPI and bounded confidence models were analyzed and the framework of lead user opinion consensus model in CCPI platform was constructed. The Deffuant model was applied in CCPI platform and the algorithm of model was improved from the establishment process of consensus and the change of the network structure. The performance of new model was tested and analyzed by a simulation experiment, and the experiment result showed that the evolution process of lead user opinion was effected by group opinion, which increased the probability of lead user opinion consensus remarkably.

Key words: customer collaboration, lead user, bounded confidence models, Deffuant model, opinion consensus, product design

中图分类号:

TP391

张磊，李志蜀，王永锋，孙亚飞，邱树雄. 基于Deffuant模型的领先用户意见一致性研究[J]. .

ZHANG Lei, LI Zhi-shu, WANG Yong-feng, SUN Ya-fei, QIU Shu-xiong. Lead user opinion consensus based on Deffuant model[J]. .

[1]	张菲菲,安贵鑫,张在旭. 基于领先用户的制造商创新决策及供应链协调策略[J]. 计算机集成制造系统, 2020, 26(5期): 1397-1406.
[2]	曾庆丰,郭倩,张岚岚,曹昶琦. 基于聚类算法的开放式创新社区领先用户识别方法[J]. 计算机集成制造系统, 2019, 25(第11): 2943-2951.
[3]	谷梦瑶,陈友玲,赵鹏. 大规模定制环境下基于客户协同程度的设计时间估计方法[J]. 计算机集成制造系统, 2016, 22(第9期): 2089-2098.
[4]	张雪峰,杨+,苏加福. 产品创新中客户协同的收益—风险评估方法[J]. 计算机集成制造系统, 2016, 22(第3期): 639-649.
[5]	于国栋,杨育,李斐,张雪峰. 客户协同产品创新系统鲁棒性分析与优化[J]. 计算机集成制造系统, 2014, 20(12): 2926-2934.
[6]	宋李俊,赵虎,周康渠. 基于粗糙小波神经网络的客户协同供应商选择过程研究[J]. 计算机集成制造系统, 2014, 20(12): 3150-3160.
[7]	杨育，邢青松,，刘爱军，王立存，于国栋，谢建中,. 客户协同产品创新中的组织模型及协调效率[J]. , 2012, 18(04): 0-0.
[8]	杨波,，刘伟. 结合问卷判断的串行金字塔法[J]. , 2011, 17(09): 0-0.
[9]	杨育，梁学栋，李晓利，包北方，杨洁. 面向客户协同创新实现的风险管理及评价[J]. , 2010, 16(05): 0-0.
[10]	张磊，王小磊,，李志蜀，杨育，金虎. 归并请求模式及其在客户协同产品创新平台中的应用[J]. , 2010, 16(03): 0-0.