知识反馈的递进式产品配置设计技术

• 论文 •

知识反馈的递进式产品配置设计技术

徐剑，裘乐淼，张树有

1.浙江大学流体传动及控制国家重点实验室，浙江杭州310027;2.中国电子科技集团公司第五十二研究所，浙江杭州310012

出版日期:2011-06-15 发布日期:2011-06-25

Progressive product configuration design technology based on knowledge feedback

XU Jian, QIU Le-miao, ZHANG Shu-you

1.State Key Lab of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China;2.No.52 Institute, China Electronics Technology Group Corporation, Hangzhou 310027, China

Online:2011-06-15 Published:2011-06-25

摘要/Abstract

摘要： 企业设计制造资源的动态变化给产品配置与知识更新带来了困难，针对这一问题，提出了知识反馈的递进式产品配置设计技术。分析了产品配置过程的递进性，据此定义了递进式配置过程的知识状态。定义了产品配置知识单元，分析了产品配置模板的生成及反馈过程，并通过粗集理论、配置设计匹配顺序排序及校验配置实现了递进式配置过程中的知识反馈，从而实现了产品配置知识的实时更新。分析了动态环境下递进式产品配置设计的整个过程，实现了知识反馈的递进式产品配置设计技术。通过在电梯产品的配置系统中的应用，验证了该技术的有效性。

关键词: 知识反馈, 产品配置, 产品设计, 知识管理, 设计制造资源, 配置模板, 电梯

Abstract: Aiming at difficulties of product configuration and knowledge update caused by dynamic changes of enterprise design and manufacturing resources, the technology of progressive configuration design based on knowledge feedback was put forward. The progressive feature of product configuration process was analyzed and the status of configuration knowledge was defined. Product Configuration Knowledge Unit (PCKU) was defined and the generation as well as feedback process of the Product Configuration Template (PCT) were analyzed. Then the knowledge feedback of the progressive configuration process was realized based on rough set, matching sort sequence of configuration design and verification product configuration. Thus the real-time update of product configuration knowledge was realized. The process of progressive configuration design under dynamic environment was analyzed, and the technology of progressive configuration design based on knowledge feedback was realized. This technology was successfully applied in the elevator configuration design and its efficiency was verified.

Key words: knowledge feedback, product configuration, product design, knowledge management, design and manufacture resources, configuration template, elevators

中图分类号:

TP391

徐剑,，裘乐淼+，张树有. 知识反馈的递进式产品配置设计技术[J]. .

XU Jian,, QIU Le-miao+, ZHANG Shu-you. Progressive product configuration design technology based on knowledge feedback[J]. .

[1]	王春雨,蒋祖华,王福华,吉永军,江辉. 面向工业软件开发的半结构化知识语义检索方法[J]. 计算机集成制造系统, 2021, 27(8): 2371-2381.
[2]	吴若仟,江屏,卢佩宜,张焱焱. 产品设计中基于质量功能配置的需求转化过程[J]. 计算机集成制造系统, 2021, 27(5): 1410-1421.
[3]	程永胜,徐骁琪,陈国强,孙利,吴俭涛. 基于神经网络的电动汽车造型意象预测模型[J]. 计算机集成制造系统, 2021, 27(4): 1135-1145.
[4]	魏莹,刘冠,李锋. 基于社交网络效应的产品设计研究[J]. 计算机集成制造系统, 2021, 27(12): 3591-3603.
[5]	苏兆婧,余隋怀,初建杰,于明玖,宫静,黄悦欣. 需求驱动的云平台产品关键设计特征识别方法[J]. 计算机集成制造系统, 2021, 27(12): 3604-3613.
[6]	乐万德,任静,刘舟洲,杨楠,初建杰. 频谱基因控制的概念产品族设计[J]. 计算机集成制造系统, 2021, 27(11): 3273-3281.
[7]	王临科,蒋祖华,李心雨. 面向工程领域的主题多样性知识推荐方法[J]. 计算机集成制造系统, 2021, 27(1): 215-228.
[8]	程贤福,万冲,邱浩洋,万丽云. 模块化产品设计中模块间的关联分析与解耦策略[J]. 计算机集成制造系统, 2020, 26(第4): 1043-1051.
[9]	伊辉勇,张露. 支持在线定制的商品和服务混合配置过程模型[J]. 计算机集成制造系统, 2020, 26(第1): 260-267.
[10]	柴灏,黄仪,张征,卢纯福,鲁聪达. 基于响应面法的多材料优化模型与应用[J]. 计算机集成制造系统, 2020, 26(7): 1824-1830.
[11]	王阳,裘乐淼,刘晓健,张树有,张利春. 基于关联约束网络的定制产品隐式需求激活技术[J]. 计算机集成制造系统, 2020, 26(7): 1855-1867.
[12]	杨程,谭昆,俞春阳. 基于评论大数据的手机产品改进[J]. 计算机集成制造系统, 2020, 26(11): 3074-3083.
[13]	罗仕鉴,边泽,张宇飞,陆佳炜,卢世主. 基于形态匹配的产品仿生设计融合[J]. 计算机集成制造系统, 2020, 26(10): 2633-2641.
[14]	苏珂,郑艺,朱运海,李杨,李邵鹏. 面向产品设计前期的集约化设计方法[J]. 计算机集成制造系统, 2020, 26(10): 2670-2677.
[15]	冀翔,张树有,刘晓健. 面向众创设计的复杂定制装备设计方案融合方法[J]. 计算机集成制造系统, 2019, 25(第9): 2344-2354.