模糊前端驱动的产品创新设计过程与应用

• 论文 •

模糊前端驱动的产品创新设计过程与应用

江屏1,2，孙建广2，张换高2，檀润华2

1.西南石油大学油气藏地质及开发工程国家重点实验室，四川成都610500；2.河北工业大学河北省制造业创新方法工程技术研究中心，天津300130

收稿日期:2013-02-25 修回日期:2013-02-25 出版日期:2013-02-25 发布日期:2013-02-25

The process and application of product innovation driven by FFE

JIANG Ping1,2，SUN Jian-guang2，ZHANG Huan-gao2，TAN Run-hua2

1.The State Key Laboratory of Oil and Gas Geology and Development Engineering，Southwest Petroleum University，Chengdu 610500，China；2.Engineering Research Center of Manufacturing Innovation Methods of Hebei Province，Hebei University of Technology，Tianjin 300130，China

Received:2013-02-25 Revised:2013-02-25 Online:2013-02-25 Published:2013-02-25

摘要/Abstract

摘要： 将模糊前端作为创新驱动力，应用发明问题解决理论中的冲突解决原理来分析产品性能与客户需求之间的差距，确定市场需求拉动的创新设想，通过结构创新对产品进行局部的改进，提高产品理想化程度和顾客满意度；应用需求进化定律与技术进化定律确定未来产品的需求及其对应技术进化的创新设想，通过原理创新对产品相关技术进行更新换代，提高产品应对市场未来变化的能力；以产品结构创新与原理创新为基础，结合计算机辅助创新知识库建立有创新设想产生到概念设计方案相融合的模糊前端驱动下的产品创新过程模型，提高设计人员自主创新的能力和创新成功率。以该创新模型为理论指导，进行带式输送机的创新设计，开发出新型磁垫式带式输送机技术方案。

关键词: 模糊前端, 创新设想, 结构创新, 原理创新, 产品开发

Abstract: Fuzzy Front End (FFE) was selected as the beginning of the product innovation stage and innovative ideas could improve the success rate of product innovation. With FFE as driving force of innovation, the gap between product performance and customer needs was analyzed by applying the conflict resolution principles of TRIZ and then innovative ideas based on market demand were determined. The ideal product level and customer satisfaction were improved by architectural innovation; The application of the law of demand evolution and the law technical of evolution were applied to determine the future evolution of demand for the product and its corresponding technology. Relevant technology of the product was upgraded through theory innovation so as to improve its response to future market demands. Based on product architectural innovation and the principles innovation, by integrating CAI Knowledge Base, systematic FFE-driven product innovation process model was established from the innovative ideas to the conceptual design, which helped the designers to improve independent innovation and innovation success rate. This innovative model was used in the innovative design of the belt conveyor and a new type of magnetic cushion belt conveyor technology was also developed.

Key words: fuzzy front end, innovative Ideas, architectural innovation, principle innovation

中图分类号:

TH122

江屏1,2，孙建广2，张换高2，檀润华2. 模糊前端驱动的产品创新设计过程与应用[J]. .

JIANG Ping1,2，SUN Jian-guang2，ZHANG Huan-gao2，TAN Run-hua2. The process and application of product innovation driven by FFE[J]. .

[1]	陈宗衡,华尔天,李生辉. 面向产品结构的多变更传播路径的并行搜索方法[J]. 计算机集成制造系统, 2021, 27(10): 2981-2989.
[2]	成方敏,余隋怀,初建杰,樊佳爽,陈健. 基于用户知识存量的3D打印云平台知识服务方法[J]. 计算机集成制造系统, 2020, 26(9): 2541-2551.
[3]	肖文星,杜纲. 协同产品模块化架构与生态升级设计的主从关联优化[J]. 计算机集成制造系统, 2019, 25(第5): 1128-1141.
[4]	殷复鹏,高琦,纪雪. 成熟度驱动的开发过程耦合活动迭代模型[J]. 计算机集成制造系统, 2019, 25(第2): 277-283.
[5]	王亚辉,余隋怀,陈登凯,初建杰,刘卓,王金磊,马宁. 基于深度学习的人工智能设计决策模型[J]. 计算机集成制造系统, 2019, 25(第10): 2467-2475.
[6]	阴艳超,张立童,廖伟智. 多维知识资源云协同的服务行为建模[J]. 计算机集成制造系统, 2019, 25(12): 3149-3159.
[7]	李靖,张新卫,王克勤,同淑荣. 基于企业产品开发绩效的顾客参与程度度量[J]. 计算机集成制造系统, 2018, 24(第8): 2045-2052.
[8]	张英英,杜纲. 考虑再制造的产品族配置主从关联优化[J]. 计算机集成制造系统, 2018, 24(第6): 1511-1521.
[9]	王昊琪,吕振宇,张旭,唐承统. 面向公差分析的几何尺寸和公差语义信息翻译[J]. 计算机集成制造系统, 2018, 24(第4): 994-1006.
[10]	王亚辉,余隋怀,陈登凯,初建杰,王淑侠. 案例驱动的协同设计知识管理模型及实现[J]. 计算机集成制造系统, 2018, 24(第3): 741-751.
[11]	杜纲,张铁斌,缪琛璐,马爽. 产品族模块化设计与平台配置的主从关联优化[J]. 计算机集成制造系统, 2018, 24(第2): 455-463.
[12]	郑玉洁,杨育,张娜,焦垚. 复杂产品工程变更传播路径动态优化[J]. 计算机集成制造系统, 2018, 24(第2): 474-483.
[13]	彭鑫,李方义,王黎明,王耿,李龙,孔琳,马艳. 产品低碳设计方法研究进展[J]. 计算机集成制造系统, 2018, 24(第11): 2846-2856.
[14]	郭于明. 产品开发网络中的设计变更传播风险预测[J]. 计算机集成制造系统, 2018, 24(第10): 2547-2558.
[15]	阳智,李延来,熊升华,蒲云. 基于多类混合信息表征的新产品方案评价模型[J]. 计算机集成制造系统, 2017, 23(第7期): 1412-1422.