基于政府激励的再制造闭环供应链定价策略及协调机制研究

• 论文 •

基于政府激励的再制造闭环供应链定价策略及协调机制研究

张曙红,张金隆,冷凯君

1.湖北经济学院湖北物流发展研究中心湖北省高校人文社科重点研究基地，湖北武汉430205；2.华中科技大学管理学院，湖北武汉430074

出版日期:2012-12-15 发布日期:2012-12-25

Pricing strategy and coordination mechanism of remanufacturing closed-loop supply chain based on government incentives

ZHANG Shu-hong, ZHANG Jin-long, LENG Kai-jun

1.Humanity & Social Science Research Base of Hubei Province,Research Center of Hubei Logistics Development, Hubei University of Economics, Wuhan 430205, China;2.School of Management, Huazhong University of Science and Technology, Wuhan 430074, China

Online:2012-12-15 Published:2012-12-25

摘要/Abstract

摘要： 针对一类由制造商、零售商组成的再制造闭环供应链系统，考虑政府奖惩激励措施，应用博弈论方法研究了新产品和再制造产品无差别定价时集中决策和分散决策模式下的定价策略，得出了闭环供应链成员的最优定价策略和最终利润。研究表明，政府激励环境中一定条件下闭环供应链的集中决策效率高于Stackelberg的博弈分散决策，通过设计一个收益共享协调定价机制，合理分配了制造商与零售商的利润，实现了闭环供应链的协调，进而分析了政府奖惩激励环境下闭环供应链协调运作中再制造过程利润超过制造过程的再制造优先条件，对再制造优先运作模式进行了探索。

关键词: 再制造, 闭环供应链, 政府激励

Abstract: For a kind of remanufacturing closed-loop supply chain system consisting of manufacturers with retailers, the game theory was used to study the pricing strategy under centralized and decentralized decision making at the indifference pricing of new products and remanufacturing products by considering government incentives. The closed-loop supply chain's optimal pricing and final profit were also obtained. The research results showed that the centralized decision making efficiency of closed-loop supply chain under certain constraint was higher than Stackelberg game decentralized decision making with governmental incentives. A revenue sharing coordination pricing mechanism was designed to distribute manufacturers and retailers' profits, and the coordination for closed-loop supply chain was achieved. The priority conditions of remanufacturing on which the remanufacturing process profits were higher than manufacturing process profits in closed-loop supply chain coordination management with government incentives were analyzed to explore the remanufacturing priority operation mode of closed-loop supply chain.

Key words: remanufacturing, closed-loop supply chain, government incentives, game theory

中图分类号:

F272

张曙红,张金隆,冷凯君. 基于政府激励的再制造闭环供应链定价策略及协调机制研究[J]. .

ZHANG Shu-hong, ZHANG Jin-long, LENG Kai-jun. Pricing strategy and coordination mechanism of remanufacturing closed-loop supply chain based on government incentives[J]. .

[1]	高鹏,杜建国,陆玉梅,朱宾欣. 政府再制造补贴对独立再制造商市场进入及产品质量决策的影响[J]. 计算机集成制造系统, 2021, 27(8): 2426-2436.
[2]	董景峰,高珊,高贵晨,杨若怡. 顾客感知价值和回收质量不确定下的闭环供应链定价决策[J]. 计算机集成制造系统, 2021, 27(8): 2476-2490.
[3]	张英英,夏一,杜纲. 产品族配置与考虑升级的再制造设计主从关联优化[J]. 计算机集成制造系统, 2021, 27(7): 2053-2064.
[4]	张雪梅,周根贵,曹柬. 考虑政府规制和供应链协调的再制造微分博弈模型[J]. 计算机集成制造系统, 2021, 27(7): 2095-2111.
[5]	杨泽青,王春方,彭凯,刘丽冰,张亚彬. 基于深度支持向量机的曲轴智能识别方法[J]. 计算机集成制造系统, 2021, 27(6): 1629-1640.
[6]	王子生,姜兴宇,刘伟军,石敏煊,杨世奇,杨国哲. 再制造机床装配过程误差传递模型与精度预测[J]. 计算机集成制造系统, 2021, 27(5): 1300-1308.
[7]	杜彦斌,吴国奥,许磊. 基于神经网络和再制造因子的再制造机床可靠性分配方法[J]. 计算机集成制造系统, 2021, 27(4): 1052-1061.
[8]	王忠伟,尹谦,庞燕,邢立宁,任腾. 再制造闭环供应链回收问题研究进展[J]. 计算机集成制造系统, 2021, 27(4): 1201-1210.
[9]	陈建华,梅俊晓,曹菁菁. 零售商主导闭环供应链混合回收渠道选择决策[J]. 计算机集成制造系统, 2021, 27(3): 954-964.
[10]	朱晨,张骥骧. 考虑零售商双渠道和回收品质量的闭环供应链定价与协调[J]. 计算机集成制造系统, 2021, 27(11): 3318-3328.
[11]	姚君,陈东彦. 基于市场努力与再制造过程创新的闭环供应链定价及协调策略[J]. 计算机集成制造系统, 2021, 27(11): 3329-3340.
[12]	肖敏,张耀. 回收率奖惩下考虑产能约束的闭环供应链制造商合作策略[J]. 计算机集成制造系统, 2021, 27(10): 3026-3035.
[13]	何娟,黄福玲,陈彦如,雷倩. 平行进口商市场入侵条件下第三方再制造影响[J]. 计算机集成制造系统, 2021, 27(1): 284-295.
[14]	姚锋敏,王悦,滕春贤. 考虑企业社会责任的闭环供应链销售努力与定价决策[J]. 计算机集成制造系统, 2020, 26(第3): 839-848.
[15]	司凤山,王晶,戴道明. 基于制造商回收的双渠道闭环供应链博弈分析[J]. 计算机集成制造系统, 2020, 26(第3): 849-859.