计算机集成制造系统 ›› 2015, Vol. 21 ›› Issue (第10期): 2653-2658.DOI: 10.13196/j.cims.2015.10.013

• 产品创新开发技术 • 上一篇    下一篇

两自由度被动阻尼器设计及数控加工应用

杨毅青,代巍   

  1. 北京航空航天大学机械工程及自动化学院
  • 出版日期:2015-10-31 发布日期:2015-10-31
  • 基金资助:
    国家自然科学基金资助项目(51205013);国家科技重大专项资助项目(2014ZX04012013);中央高校基本科研业务费资助项目(YWF-13-D2-HK-21,YWF-14-JXXY-01)。

Design and machining application of two-degree-of-freedom passive damper

  • Online:2015-10-31 Published:2015-10-31
  • Supported by:
    Project supported by the National Natural Science Foundation,China(No.51205013),the National Science and Technology Major Project,China(No.2014ZX04012013),and the Fundamental Research Funds for the Central Universities,China(No.YWF-11-02-258,YWF-14-JXXY-01).

PDF

摘要： 为了对被动阻尼器的设计参数进行优化,抑制切削振动,提高切削效率与质量,通过研究对比各优化准则下单自由度、两自由度、两重及三重阻尼器的抑振性能,表明两自由度阻尼器综合性能更为优越。在此基础上提出一种两自由度阻尼器结构方案,并推导该阻尼器的动力学特性,并结合有限元方法进行验证。设计了弱刚性工装系统并开展切削实验,通过对比阻尼器安装前后工件振动的信号,表明两自由度阻尼器可将切削振动幅值最大降低56.4%。

关键词: 被动阻尼器, 振动抑制, 优化准则, 性能分析

Abstract: To optimize the design parameters of passive damper in vibration suppression,and to improved the cutting efficiency,by performing the numerical simulation,the result showed that two-Degree-Of-Freedom (DOF) damper was the best vibration suppression performance among Single DOF (SDOF) damper,two-DOF damper,two SDOF dampers and three SDOF dampers with equal mass.A structure scheme of two-DOF damper was proposed and its dynamics were formulated,which was verified by finite element method.A flexible fixture assembly was designed and the machining tests were carried out.The vibration amplitude of workpiece was reduced up to 56.4% after employing the damper.

Key words: passive damper, vibration suppression, optimization criterion, performance analysi

中图分类号: 

京ICP备12012770号-3
Copyright © 《计算机集成制造系统》编辑部
技术支持：北京玛格泰克科技发展有限公司
总访问量
今日访问
在线人数