复杂零件协同制造任务信息模型及建模方法

• 论文 •

复杂零件协同制造任务信息模型及建模方法

姚倡锋，张定华，卜昆，王增强

西北工业大学现代设计与集成制造技术教育部重点实验室，陕西西安710072

出版日期:2009-01-15 发布日期:2009-01-25

Collaborative manufacturing task information model and its model building method for complex parts

YAO Chang-feng, ZHANG Ding-hua, BU Kun, WANG Zeng-qiang

Key Lab of Contemporary Design & Integrated Manufacturing Technology, Ministry of Education, Northwestern Polytechnical University, Xi'an 710072,China

Online:2009-01-15 Published:2009-01-25

摘要/Abstract

摘要： 针对网络化环境下的复杂零件协同制造，研究了协同制造任务信息模型及建模方法。定义了协同制造任务和制造子任务，提出了基于逻辑制造单元和逻辑加工路线的协同制造任务和制造子任务表征；建立了逻辑制造单元的信息结构，定义了相关“元语”，研究了逻辑加工路线的信息模型及其有向图表示；提出了协同制造任务的分解过程涵盖逻辑制造单元和逻辑加工路线的设计，并分别给出了设计方法。最后，以叶片零件为例，讨论了其协同制造任务分解的应用过程。

关键词: 协同制造任务, 信息模型, 建模, 逻辑制造单元, 逻辑加工路线

Abstract: Aiming at the collaborative manufacturing of complex parts in networked environment, the collaborative manufacturing task information model and its model building method were studied. Collaborative manufacturing tasks and sub-tasks were defined. Collaborative manufacturing tasks and sub-tasks characteristics were proposed based on Logical Manufacturing Unit (LMU) and Logical Manufacturing Process (LMP). Information structure of LMU was established, and the information model and directed graph expression were studied. Collaborative manufacturing task decomposition process covering the design of LMU and LMP was put forward, and the design methods for LMU and LMP were provided. Finally, taking blade complex parts as example, the application and implementation process of collaborative manufacturing task decomposition were discussed.

Key words: collaborative manufacturing task, information model, model building, logical manufacturing unit, logical manufacturing process

中图分类号:

TH165

姚倡锋，张定华，卜昆，王增强. 复杂零件协同制造任务信息模型及建模方法[J]. .

YAO Chang-feng, ZHANG Ding-hua, BU Kun, WANG Zeng-qiang. Collaborative manufacturing task information model and its model building method for complex parts[J]. .

[1]	朱坚民,石园园,田丰庆,黄扬辉,孟聪,陈琳. 考虑夹头与刀具过渡段的主轴系统精确建模[J]. 计算机集成制造系统, 2021, 27(8): 2215-2225.
[2]	杨旭亭,王孜悦,李凤鸣,宋锐. 基于过程建模的机器人分阶引导装配方法[J]. 计算机集成制造系统, 2021, 27(8): 2321-2330.
[3]	肖甜丽,马义中,林成龙. 面向质量设计的Kriging组合建模技术[J]. 计算机集成制造系统, 2021, 27(7): 2023-2034.
[4]	吴鹏兴,郭宇,黄少华,杨能俊,熊伟杰,郭具涛. 基于数字孪生的离散制造车间可视化实时监控方法[J]. 计算机集成制造系统, 2021, 27(6): 1605-1616.
[5]	王仁伟,张松,葛人杰,栾晓娜,王家昌,鲁韶磊. 改进的球头铣刀加工表面形貌建模方法[J]. 计算机集成制造系统, 2021, 27(4): 973-980.
[6]	朱天明,武春龙,周有城,张鹏,张小俊. 基于TRIZ功能建模的扩展碰撞预警系统数字孪生概念方案构建[J]. 计算机集成制造系统, 2021, 27(2): 337-351.
[7]	苟艺星,王军强,李洋. 事件驱动的流水线建模与质检机器配置优化[J]. 计算机集成制造系统, 2021, 27(2): 487-500.
[8]	易扬,冯锦丹,刘金山,陈长江,刘晓军,倪中华. 复杂产品数字孪生装配模型表达与精度预测[J]. 计算机集成制造系统, 2021, 27(2): 617-630.
[9]	魏莹,刘冠,李锋. 基于社交网络效应的产品设计研究[J]. 计算机集成制造系统, 2021, 27(12): 3591-3603.
[10]	张玉金,黄博,廖文和. 面向场景的航空发动机基于模型的系统工程设计[J]. 计算机集成制造系统, 2021, 27(11): 3093-3102.
[11]	陶飞,张贺,戚庆林,徐俊,孙铮,胡天亮,刘晓军,刘庭煜,关俊涛,陈畅宇,孟凡伟,张辰源,李志远,魏永利,朱铭浩,肖斌. 数字孪生模型构建理论及应用[J]. 计算机集成制造系统, 2021, 27(1): 1-16.
[12]	王建,黎荣,武浩远,丁国富,郑宇飞. 按单设计型复杂产品的配置设计技术综述[J]. 计算机集成制造系统, 2020, 26(第2): 410-425.
[13]	李文川,高思源,章鑫,冯良清. 基于随机Petri网的企业RFID技术采纳内化建模与仿真[J]. 计算机集成制造系统, 2020, 26(第2): 470-480.
[14]	郑伟皓,周星宇,吴虹坪,李红梅,朱新童,文林江. 基于三维GIS技术的公路交通数字孪生系统[J]. 计算机集成制造系统, 2020, 26(第1): 28-39.
[15]	唐霞,杨颖,刘晓军,仇晓黎,贾连军. 大型复杂雕塑型面钢架特征曲线快速设计方法[J]. 计算机集成制造系统, 2020, 26(第1): 114-123.