计算机集成制造系统 ›› 2014, Vol. 20 ›› Issue (5): 1013-.DOI: 10.13196/j.cims.2014.05.zhuqifeng.1013.7.2014053

• 产品创新开发技术 • 上一篇    下一篇

一种快速收敛的多学科协同优化方法

朱崎峰1,宋保维2   

  1. 1.河南理工大学机械与动力工程学院
    2.西北工业大学航海学院
  • 出版日期:2014-05-30 发布日期:2014-06-12

Multidisciplinary collaborative optimization with fast convergence characteristic

  • Online:2014-05-30 Published:2014-06-12

摘要: 为解决协同优化方法求解速度过慢的问题,提出一种快速收敛的多学科设计协同优化方法。在该求解方法中,系统优化的全部设计变量分为全局变量和局部变量,协同优化方法中的辅助设计变量被消去;系统级只控制全局变量,学科级控制局部变量;在系统级添加各学科中包含全局变量的约束条件,并基于学科状态方程构造耦合变量一致性约束条件;从各子学科中消除耦合变量的一致性问题,子学科目标的优化只对系统目标的最优起指向性作用。采用两个典型的多学科设计优化算例,检验快速收敛的多学科设计协同优化方法的计算特性,结果表明该方法的收敛迭代步数比协同优化方法大大减少,具有更快的收敛速度。

关键词: 多学科设计, 协同, 优化, 收敛速度

Abstract: To increase the convergence speed of Collaborative Optimization (CO) method,a Fast convergence collaborative optimization (FCCO) method was proposed.In this method,auxiliary design variables were eliminated by dividing all variables into private and public design variables.Public and private design variables were optimized in system and discipline level respectively.Constraint conditions involving public variables from disciplines were added to the system level,and the consistency constraints were also constructed based on discipline state equations.The consistency problem for coupled variables was eliminated in the discipline level,and the optimization of discipline target only had a positive effect on system target.The computational characteristic of the proposed method was verified by two typical examples,and the results showed that this method could take much less iterations and had a faster convergence speed than CO method.

Key words: multidisciplinary design, collaboration, optimization, convergence speed

中图分类号: