[1]XIE Nan,QIAN Gouliang,WEI Naxin,et al.A measurement system of ship motions during model tests and full scale sea keeping trials[J].Journal of Ship Mechanics,2001,22(7):35-38.
[2]JIN Zhongda.The conspectus of ship hull[M].Harbin:Harbin Engineering University Press,2005(in Chinese).[金仲达.船体概论[M].哈尔滨:哈尔滨工程大学出版社,2005.]
[3]ZHU Linsen,TANG Yangping,BIN Hongzan,et al.Study on symmetrical machining technology[J].International Journal of Advanced Manufacturing Technology,2008,36(9/10):844-851.
[4]GUO Yuming,SUN Yanming,ZHENG Shixiong.Overview of information integration technology of advanced manufacturing systems[J].Modular Machine Tool & Automatic Manufacturing Technique,2006(4):1-6(in Chinese).[郭于明,孙延明,郑时雄.先进制造系统信息集成技术综述[J].组合机床与自动化加工技术,2006(4):1-6.]
[5]WANG Dong,QIAN Hong.The identification of ship planar graphics and expert system[J].Ship & Boat,2005(2):57-60(in Chinese).[王栋,钱宏.船舶二维图形知识与专家系统[J].船舶,2005(2):57-60.]
[6]ZHANG Mingxia,LIN Yan,JI Zhuoshang.Advances of ship surface modeling[J].Journal of Dalian University of Technology,2003,43(2):207-212(in Chinese).[张明霞,林焰,纪卓尚.船体曲面造型研究时展[J].大连理工大学学报,2003,43(2):207-212.]
[7]ZHU Linsen,TANG Yangping,BIN Hongzan,et al.3-D modeling method of ship model surface for numerical control machining[J].Journal of Traffic and Transportation Engineering,2006,6(1):78-81(in Chinese).[朱林森,汤漾平,宾鸿赞,等.面向数控加工的船模曲面三维造型方法[J].交通运输工程学报,2006,6(1):78-81.]
[8]Electronic Data Systems Corporation.Unigraphics essentials[M].Palo Alto,Cal.,USA:Electronic Data Systems Corporation Unigraphics,1994.
[9]BARDIS L,VAFIADOU M.Ship-hull geometry representation with B-spline surface patches[J].Computer-Aided Design,1992,24(4):217-222.
[10]MUNLIN M,MAKHANOV S.Tool path generation,simulation and optimization of a five-axis milling machine[C]//Proceedings of IEEE TENCON 2004.Washington,D.C.,USA:IEEE,2004:609-612. |