Research on reverse engineering technology based on features

Abstract

Abstract: To promote the use of feature-based techniques in Reverse Engineering (RE) and support innovative design, feature-based reverse engineering technology was systematically studied. Based on analysis and summarization of the concept and development trend of feature-based RE. The section feature-based and surface feature-based modeling strategies were proposed, and the relationships of the two types of strategies in feature-based RE were also discussed. The example of blade reconstruction indicated that with application of two strategies in feature-based RE, parametric CAD model with higher precision and better quality could be reconstructed rapidly.

Key words: reverse engineering, surface feature, section feature, modeling strategy

摘要： 为了进一步推动特征技术在反求工程中的应用，支持产品的创新设计，系统地研究了对基于特征的反求工程技术；分析和总结了基于特征的反求工程技术的概念和发展方向；提出了基于曲面特征和基于截面特征的2种建模策略，并分析了它们在基于特征的反求工程建模中的关系。通过叶片的重建实例表明，在基于特征的反求工程中，综合运用2种建模策略，可以高效率地重建出满足精度要求的、高质量的参数化计算机辅助设计模型。

关键词: 反求工程, 曲面特征, 截面特征, 建模策略

CLC Number:

TP391

LIU Yun-feng, KE Ying-lin, WANG Qiu-cheng, HU Xiao-dong,PENG Wei. Research on reverse engineering technology based on features[J]. .

刘云峰，柯映林，王秋成，胡晓冬，彭伟. 基于特征的反求工程技术研究[J]. .

References

［1］ SHAN Dongri. Research on technology of geometric feature and constraint in reverse engineering［D］.Hangzhou: Zhejiang University, 2003(in Chinese).［单东日. 反求工程CAD建模中的特征与约束技术研究［D］.杭州: 浙江大学, 2003.］

[2] VARADY T, MARTIN R R, COXT J. Reverse engineering of geometric models-an introduction［J］.Computer-Aided Design, 1997, 129(4):255-268.

[3] VARADY T, MARTIN R R, COXT J. Reverse engineering of geometric models［J］.Computer-Aided Design, 1997, 29(4): 253-254.

[4] SUN Jiaguang. Basics of computer aided design technology［M］.Beijing: Tsinghua University Press, 2000(in Chinese).［孙家广．计算机辅助设计技术基础［M］．北京：清华大学出版社，2000.］

[5] THOMPSON W B, OWEN J C, STARK S R, et al. Feature-based reverse engineering of mechanical parts［J］.IEEE Transactions on Robotics and Automation, 1999, 15(1):57-66.

[6] AU C K, YUEN M M F. Feature-based reverse engineering of mannequin for garment design［J］.Computer-Aided Design, 1999, 31(12):751-759.

[7] BENKO P, MARTIN R R, VARADY T. Algorithms for reverse engineering boundary representation models［J］.Computer-Aided Design, 2001，33(11):839-851.

[8] BENKO P, KOS G, VARADY T, et al. Constrained fitting in reverse engineering［J］.Computer Aided Geometric Design, 2002, 19(3):173-205.

[9] BENKO P, VARADY T. Segmentation methods for smooth point regions of conventional engineering objects［J］.Computer-Aided Design, 2004, 36(6):511-523.

[10] KOS G, MARTIN R R, VARADY T. Methods to recover constant radius rolling ball blends in reverse engineering［J］.Computer Aided Geometry Design, 2000, 17(2): 127-160.

[11] HUANG JB. Geometric feature extraction and model reconstruction from unorganized points for reverse engineering of mechanical objects with arbitrary topology［D］.Salt Lake City,OH,USA: The Ohio State University, 2001.

[12] HUANG J B, MENQ C H. Automatic data segmentation for geometric feature extraction from unorganized 3-D coordinate points［J］.IEEE Transactions on Robotics and Automation, 2001, 17(3): 268-279.

[13] KE Yinglin, LIU Yunfeng, FAN Shuqian, et al. Feature-Based Reverse Engineering Modeler-RE-SOFT［J］.Journal of Computer-Aided Design & Computer Graphics, 2004, 16(6): 799-811(in Chinese).［柯映林, 刘云峰, 范树迁,等. 基于特征的反求工程建模系统RE-SOFT［J］.计算辅助设计与图形学学报, 2004, 16(6): 799-811.］

[14] LU Z, KE YL, SUN Q, et al. Method to extract blend surface feature in reverse engineering［J］.Chinese Journal of Mechanical Engineering (English Edition), 2003, 16(3):248-251.

[15] KE Yinglin, LI An, WANG Junwen. Theory and method of statistics and probability in extraction of blend feature［J］.Chinese Journal of Mechanical Engineering, 2003, 39(6):140-144(in Chinese).［柯映林，李岸，王军文. 过渡特征提取中的概率统计理论和方法［J］.机械工程学报，2003, 39(6):140-144.］

[16] KE YL, SUN Q, LU Z. Least-square method based feature fitting and extraction in reverse engineering［J］.Chinese Journal of Mechanical Engineering(English edition), 2003, 16(2):163-166.

[17] SHAN Dongri, KE Yinglin. Quadric feature extraction from points cloud in reverse engineering［J］.Journal of Computer-Aided Design & Computer Graphics, 2003, 15(12):1497-1501(in Chinese).［单东日，柯映林. 反求工程中点云数据的二次曲面特征提取技术［J］.计算辅助设计与图形学学报, 2003, 15(12):1497-1501.］

[18] JIA Ming. Study on hybrid CAD modeling theory and method in reverse engineering［D］.Hangzhou: Zhejiang University, 2003(in Chinese).［贾明. 反求工程CAD混合建模理论与方法研究［D］.杭州：浙江大学，2003.］

[19] LIU Yunfeng. Study on key modeling techniques based on section feature in reverse engineering［D］.Hangzhou: Zhejiang University, 2004(in Chinese).［刘云峰. 基于截面特征的反求工程CAD建模关键技术研究［D］.杭州：浙江大学，2004.］

[1]	. Simplification and optimization of triangular mesh model based on dynamic error control and PSO [J]. , 2018, 24(第1): 63-71.
[2]	. B-spline curve approximation technique based on reduction of control point [J]. , 2016, 22(第6期): 1396-1402.
[3]	. Machining allowance analysis and optimization of irregular shaped component in high speed aero-vehicle [J]. , 2016, 22(第6期): 1456-1464.
[4]	. Reversing factor springback compensation method based on reverse engineering technology [J]. , 2015, 21(第6期): 1436-1441.
[5]	. Holes floating position tolerance modeling and registration based on reverse engineering [J]. , 2015, 21(第1期): 101-107.
[6]	. Key technologies and applications of the reverse engineering aided used part remanufacturing [J]. , 2015, 21(第1期): 143-150.
[7]	. Matching method of point cloud models based on auxiliary device [J]. , 2014, 20(5): 1029-.
[8]	. High quality triangular mesh simplification with feature-preserving [J]. , 2014, 20(3): 486-.
[9]	. Removal method for stair-stepped artifacts based on improved spherical cover algorithm [J]. , 2014, 20(2): 284-.
[10]	. Tool-path regeneration for point cloud design modification [J]. , 2013, 19(10): 2432-2437.
[11]	CHEN Zhong1,2, DUAN Li-ming1,2+, LIU Lu1,2. Feature-preserving uniform mesh smoothing algorithm [J]. , 2013, 19 (03 ): 0-0.
[12]	HE Qiang, ZHANG Shu-sheng, BAI Xiao-liang. Robust algorithm for symmetry plane extraction in reverse engineering [J]. , 2012, 18(06): 0-0.
[13]	ZHONG Shan ,, YANG Yong-qiang. Precise slicing method based on STL in RE/RP integrated system [J]. , 2012, 18(06): 0-0.
[14]	CHEN Jie, GAO Cheng-hui+, HE Bing-wei. Hole filling algorithm in triangular meshes [J]. , 2011, 17(08): 0-0.
[15]	HAN You-ang, ZHANG Ying-jie. Tool path generation on measured data using moving least squares method [J]. , 2011, 17(03): 0-0.