基于Petri网的机床制造过程碳排放建模与量化方法

• 论文 •

基于Petri网的机床制造过程碳排放建模与量化方法

李先广，李聪波, 刘飞, 李玲玲

1.重庆大学机械传动国家重点实验室, 重庆400030；2.重庆机床（集团有限责任公司, 重庆400055

出版日期:2012-12-15 发布日期:2012-12-25

Modeling and quantification methods for carbon emission in machine tools manufacturing processes based on Petri nets

LI Xian-guang, LI Cong-bo, LIU Fei, LI Ling-ling

1.State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400030, China; 2.Chongqing Machine Tool (Group

Online:2012-12-15 Published:2012-12-25

摘要/Abstract

摘要： 为减少机床制造业在制造过程中的碳排放，对机床制造过程的碳排放边界进行界定，并对机床制造过程碳排放特性进行分析；基于Petri网建立了机床制造过程碳排放模型，并提出机床制造过程碳排放动态量化方法。将上述理论研究应用到某企业的机床制造过程中，得到其机床制造过程碳排放量情况，并据此提出了节能减排的措施建议。

关键词: 机床制造, 碳排放, Petri网, 节能减排

Abstract: As the big typical consumer of energy resources, the machine tool manufacturing industry's carbon emission had significance on realization of our country's energy-conservation and emission-reduction. The boundary of carbon emission in machine tool manufacturing process was defined, and the characteristics of carbon emission were also analyzed. A carbon emission model for machine tool manufacturing process was constructed based on Petri net, and the dynamic quantification methods for carbon emission in the manufacturing process were proposed. The proposed methods were applied in a machine tool manufacturing factory, and its carbon emission condition was obtained. Thus the suggestions for energy-conservation and emission-reduction were given.

Key words: machine tool manufacturing, carbon emission, Petri nets, energy-saving and emission-reduction

中图分类号:

TH17

李先广,, 李聪波+, 刘飞, 李玲玲. 基于Petri网的机床制造过程碳排放建模与量化方法[J]. .

LI Xian-guang,, LI Cong-bo+, LIU Fei, LI Ling-ling. Modeling and quantification methods for carbon emission in machine tools manufacturing processes based on Petri nets[J]. .

[1]	鲁法明,崔明浩,包云霞,曾庆田,段华. 基于程序运行轨迹Petri网模型挖掘的死锁检测方法[J]. 计算机集成制造系统, 2021, 27(9): 2611-2624.
[2]	王丽丽,方贤文. 基于行为距离的带隐变迁过程模型挖掘方法[J]. 计算机集成制造系统, 2021, 27(9): 2670-2679.
[3]	葛显龙,冉小芬. 基于时间窗指派的污染路径问题[J]. 计算机集成制造系统, 2021, 27(4): 1178-1187.
[4]	张海军,闫琼,张国辉,李庆宇,余杰. 基于数字孪生的制造资源动态优选决策[J]. 计算机集成制造系统, 2021, 27(2): 521-535.
[5]	王万良,朱文成,赵燕伟. 基于全局边缘排序的超启发算法在绿色物流选址—路径优化问题中的应用[J]. 计算机集成制造系统, 2020, 26(第4): 1097-1107.
[6]	鲁建厦,施贻贯,汤洪涛,詹燕. 考虑碳排放的子母穿梭车密集仓储系统复合作业三维路径规划[J]. 计算机集成制造系统, 2020, 26(第3): 795-805.
[7]	李文川,高思源,章鑫,冯良清. 基于随机Petri网的企业RFID技术采纳内化建模与仿真[J]. 计算机集成制造系统, 2020, 26(第2): 470-480.
[8]	何彦,陈文奇,王禹林,岳冠楠,李育锋,田小成. 集成设计参数和制造参数的车削工件机加工能耗预测方法[J]. 计算机集成制造系统, 2020, 26(9): 2355-2366.
[9]	张立彬,吕焕培,胥芳,谭大鹏,陈教料,林琼. 面向低压电器的CPN协同装配任务建模与优化[J]. 计算机集成制造系统, 2020, 26(7): 1737-1748.
[10]	刘聪,程龙,曾庆田,闻立杰,欧阳春. 基于Petri网的分层业务过程挖掘方法[J]. 计算机集成制造系统, 2020, 26(6): 1525-1537.
[11]	黄苾,代飞,王亚博,莫启,曹涌,王雷光. 基于Petri网分析编排的可实现性[J]. 计算机集成制造系统, 2020, 26(6): 1548-1556.
[12]	韩咚,田银花,杜玉越,张琴. 基于Petri网可达图的业务对齐方法[J]. 计算机集成制造系统, 2020, 26(6): 1589-1606.
[13]	郝惠晶,方贤文,方娜,许健. 基于Petri网的业务流程低频行为挖掘与优化分析[J]. 计算机集成制造系统, 2020, 26(6): 1660-1667.
[14]	王舜,赵燕伟,冷龙龙,张春苗,蒋海青. 基于蚁群选择超启发算法的低碳选址—路径问题[J]. 计算机集成制造系统, 2020, 26(6): 1702-1716.
[15]	蒋海青,赵燕伟,张景玲,冷龙龙. 低碳动态开放式选址—路径问题[J]. 计算机集成制造系统, 2019, 25(第9): 2365-2376.