异地协同制造资源优化配置过程模型及实现

• 论文 •

异地协同制造资源优化配置过程模型及实现

姚倡锋，张定华，卜昆，汪文虎，任军学

西北工业大学现代设计与集成制造教育部重点实验室，陕西西安710072

出版日期:2008-03-15 发布日期:2008-03-25

Collaborative manufacturing resources optimization deployment process model and its realization

YAO Chang-feng，ZHANG Ding-hua，BU Kun，WANG Wen-hu，REN Jun-xue

The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology，Ministry of Education， Northwestern Polytechnical University， Xi’an 710072

Online:2008-03-15 Published:2008-03-25

摘要/Abstract

摘要： 针对复杂零件异地协同制造的资源优化配置问题，提出敏捷加工路线的概念，建立以工艺流程为核心的制造资源优化配置概念模型和过程模型。将制造资源优化配置问题归结为逻辑制造单元—物理制造单元映射、物理制造单元排序筛选和敏捷加工路线的优化生成三过程，并分别给出了其实现方法。最后，论述了网络化制造资源优化配置平台的构建，并应用于某型号发动机叶片协同制造，验证了优化配置过程模型的可行性和实用性。

关键词: 敏捷加工路线, 资源优化配置, 物理制造单元, 逻辑制造单元, 逻辑加工路线, 可执行加工路线

Abstract: To deal with networked collaborative manufacturing resources optimization deployment problem， a new conception， Agile Manufacturing Process (AMP) was defined. For the purpose of AMP’s creation， the basic conception model and process model of manufacturing resources optimization deployment were constructed by taking processing flow as core. And the networked manufacturing resources optimization deployment process model was summarized as three basic sub-processes: Logical Manufacturing Unit (LMU)-Physical Manufacturing Unit (PMU) mapping， filtering PMU and AMP optimization and creation. Realization methods for these sub-processes were also provided. Finally， the establishments of networked manufacturing resources optimization deployment platforms were discussed， and the application process as well as operation result were analyzed by taking the turbine blade of an aero engine as a typical case. Feasibility and applicability of the process model were verified.

Key words: agility manufacturing process, manufacturing resources optimization deployment, physical manufacturing unit, logical manufacturing unit, logical manufacturing process, executive manufacturing process

中图分类号:

姚倡锋，张定华，卜昆，汪文虎，任军学. 异地协同制造资源优化配置过程模型及实现[J]. .

YAO Chang-feng，ZHANG Ding-hua，BU Kun，WANG Wen-hu，REN Jun-xue. Collaborative manufacturing resources optimization deployment process model and its realization[J]. .

[1]	张中伟,唐任仲,陶俐言. 非线性工艺规划的资源优化配置[J]. 计算机集成制造系统, 2016, 22(第2期): 516-528.
[2]	苏凯凯,徐文胜,李建勇. 云制造环境下基于非合作博弈的资源优化配置方法[J]. 计算机集成制造系统, 2015, 21(第8期): 2228-2239.
[3]	包北方,杨育,杨涛,薛承梦,谢建中. 产品定制协同制造资源优化配置[J]. 计算机集成制造系统, 2014, 20(08): 1807-1818.
[4]	费玉莲,蒋曼曼,陈达强,韩威. 基于数量折扣的升级替代产品资源优化配置[J]. 计算机集成制造系统, 2013, 19(08 ): 2058-2065.
[5]	赵岩，莫蓉. 面向快速扩散制造的逻辑生产线设计关键技术研究[J]. , 2009, 15(07): 0-0.
[6]	姚倡锋，张定华，卜昆，王增强. 复杂零件协同制造任务信息模型及建模方法[J]. , 2009, 15(01): 0-0.
[7]	姚倡锋，张定华，卜昆，汪文虎，任军学. 基于物理制造单元的网络化制造资源建模及信息集成[J]. , 2008, 14(04): 0-0.
[8]	余剑峰，李原，于海山，沈琴. 基于自适应蚁群算法的协同制造项目资源优化配置[J]. , 2008, 14(03): 0-0.
[9]	刘冠权,. 基于粗糙集理论的区域虚拟企业资源优化决策[J]. , 2007, 13(11): 0-0.
[10]	姚倡锋，张定华，彭文利，李山. 面向复杂零件网络化制造的资源优化配置方法[J]. , 2006, 12(07): 0-0.
[11]	田锡天，张振明，仝春民<. 面向网络化制造的工艺分工规划技术研究[J]. , 2005, 11(08): 0-0.
[12]	赵慧娟，居文军，王淑营，殷成凤. 软件资源共享及其在网络化制造系统中的应用[J]. , 2003, 9(7): 0-0.