Hierarchical module division method based on product services flow

Abstract

Abstract: To systemically analyze the customer demand mapping in modular design and module division method,a customer requirements mapping method by integrating associated hypergraph with　Quality Function Deployment (QFD) and a hierarchical module division approach based on hypergraph clustering algorithms were proposed.According to the relation intensity among components and the relation intensity between parts and requirements,the degree of service correlation was defined.The hierarchical modular division process was accomplished based on service correlation degree by introducing the hypergraph clustering algorithms to modular division,and the division result was optimized by calculating the variant design complexity and the independence between modules.The method was proved to be applicable and effective in an instance of hierarchical module partition of a certain engine.

Key words: customer demand model, product services flow, service relevance, hypergraph clustering, hierarchical module division

摘要： 为系统化地分析模块化设计中客户需求映射及模块划分的方法,提出关联超图与质量功能展开相结合的客户需求映射方法和基于超图聚类算法的分级模块划分方法。根据超图模型中各零部件间的关联强度和各零部件与客户需求的联系强度,对服务相关度进行了定义。将超图聚类算法引入到模块划分领域,依据服务相关度进行了分级模块划分,通过计算客户参与复杂度和模块独立性对划分结果进行优化。以某发动机的分级模块划分为例说明了所提方法的可行性和有效性。

关键词: 客户需求模型, 产品服务流, 服务相关度, 超图聚类, 分级模块划分

CLC Number:

TH122

XIAO Yan-qiu1,ZHAO He1,QIAO Dong-ping1,LI Hao1,2,WANG Lei1. Hierarchical module division method based on product services flow[J]. .

肖艳秋1,赵和1,乔东平1,李浩1,2,王磊1. 基于产品服务流的分级模块划分方法[J]. .

References

［1］TSENG H E,CHANG C C,LI J D.Modular design to support green life-cycle engineering［J］.Expert Systems with Applications,2008,34(4);2524-2537.
[2]KAMRANI A K,GONZALEZ R.A genetic algorithm-based solution methodology for modular design［J］.Journal of Intelligent Manufacturing,2003,14(6):599-616.
[3]NIE Da懡渀,LI Yan,MA Guanglin,et al.Simultaneous multi-product design method based on customer requirements classification［J］.Computer Integrated Manufacturing Systems,2010,16(6):1131-1137(in Chinese).［聂大安,李彦,麻广林,等.基于用户需求分类的同步多产品设计方法［J］.计算机集成制造系统,2010,16(6):1131-1137.］
[4]YAN Peng,ZHAO Liping,WANG Guanqun,et al.Product modular configuration oriented to customer requirements analysis［J］.Computer Integrated Manufacturing Systems,2010,16(11):2341-2345(in Chinese).［延鹏,赵丽萍,王冠群,等.面向客户需求分析的产品模块化配置方法［J］.计算机集成制造系统,2010,16(11):2341-2345.］
[5]HERBERT M,KWANG J K.QFD optimizer:a novice friendly quality function deployment decision support system for optimizing product design［J］.Computer and Industrial Engineering,1997,32(3):641-655.
[6]NELSON S.Structural optimization of product families subjected to multiple crash load case［J］. Structural and Multidisciplinary Optimization,2010,41(5):797-815.
[7]LIU Jiangang,TANG Dunbing,LIU Sifeng,et al.Modular method for product architecture based on relation information flow［J］.Computer Integrated Manufacturing Systems,2011,17(11):2373-2382(in Chinese).［刘建刚,唐敦兵,刘思峰,等.基于联系信息流量的产品结构模块化方法［J］.计算机集成制造系统,2011,17(11):2373-2382.］
[8]GONG Zhibing,LI Dongbo,SHI Xiang.Module generation and module partition method for product configuration［J］.Chinese Journal of Mechanical Engineering,2007,43(11):160-167(in Chinese).［贡智兵,李东波,史翔.面向产品配置的模块形成及划分方法［J］.机械工程学报,2007,43(11):160-167.］
[9]GAO Fei,XIAO Gang,PAN Shuangxia,et al.Method of product function module partition［J］.Chinese Journal of Mechanical Engineering,2007,43(5):160-167(in Chinese).［高飞,肖刚,潘双夏,等.产品功能模块划分方法［J］.机械工程学报,2007,43(5):160-167.］
[10]STONE R B,WOOD K L,CRAWFORD R H.A heuristic method for identifying modules for product architectures［J］.Design Studies,2000,21(1):5-31.
[11]WANG P P,MING X G,LI D,et al.Modular development of product service systems［J］.Concurrent Engineering,2011,19(1):86-96.
[12]WANG Zhongjie,XU Xiaofei.Service value dependency model based on layered hyper-graph［J］.Computer Integrated Manufacturing Systems,2011,17(8):1834-1843(in Chinese).［王忠杰,徐晓飞.基于分层超图的服务价值依赖模型［J］.计算机集成制造系统,2011,17(8):1834-1843.］
[13]GU P,HASHEMIAN M,SOSALE S.An integrated modular design methodology for life-cycle engineering［J］.Annals of the CIRP,1997,46(1):71-74.
[14]GU P,SOSALE S.Product modularization for life cycle engineering［J］.Robotics and Computer Integrated Manufacturing,1999,15(5):387-401.
[15]PAN Shuangxia,GAO Fei,FENG Pei’en.Module partition method research under the circumstances about mass customization［J］.Chinese Journal of Mechanical Engineering,2003,39(7):1-6(in Chinese)［潘双夏,高飞,冯培恩.批量客户化生产模式下的模块划分方法研究［J］.机械工程学报,2003,39(7):1-6.］
[16]LIU Jiangang,MA An,WANG Ningsheng.Clustering algorithm of product architecture modularization based on desing structure matrix［J］.Journal of South China University of Technology:Natural Science Edition,2006,34(11):45-49(in Chinese).［刘建刚,马安,王宁生.基于设计结构矩阵的产品结构模块聚类方法［J］.华南理工大学学报:自然科学版,2006,34(11):45-49.］
[17]VASANTHA G V A,ROY R,LELAH A,et al.A review of product-service systems design methodologies［J］.Journal of Engineering Design,2012,23(9):635-659.
[18]SAKAO T,SHIMOMURA Y,SUNDIN E,et al.Modeling design objects in CAD system for service/product engineering［J］.Computer-Aided Design,2009,41(3);197-213.
[19]XIAO Yanqiu,LUO Guofu,MA Jun,et al.An approach for module decomposition based on fuzzy pattern recognition［J］.Computer-Aided Design,2009,41(3):197-213.

[1]	. Ant colony labor division algorithm for position selection in circle packing problem [J]. , 2021, 27(12): 3578-3590.
[2]	. Functional trimming method based on technical system evolution and substance-field transformation [J]. , 2021, 27(11): 3259-3272.
[3]	. Product structure oriented parallel search method for multi-change propagation paths [J]. , 2021, 27(10): 2981-2989.
[4]	. Ensemble Kriging modeling technique for quality design [J]. , 2021, 27(7): 2023-2034.
[5]	. Improvement and fusion research based on correlation function and D-HS index in case retrieval [J]. , 2021, 27(4): 1108-1119.
[6]	. Life cycle environmental impact assessment of machine tool based on multi-level data distribution [J]. , 2021, 27(3): 757-769.
[7]	. Optimization design method of equal-section structure in multi-field operation requirements [J]. , 2021, 27(3): 857-867.
[8]	. Theory and method for product service system symbiosis design [J]. , 2021, 27(2): 328-336.
[9]	. Construction of extended collision warning system digital twin conceptual scheme based on TRIZ functional modeling [J]. , 2021, 27(2): 337-351.
[10]	. Topology optimization of multiple materials continuum structure with stress constraints [J]. , 2021, 27(1): 150-156.
[11]	. Recommendation of personalized product-service system scheme based on improved collaborative filtering [J]. , 2021, 27(1): 240-248.
[12]	. Robust parameter design for signal-response systems using improved grey-TOPSIS model [J]. , 2020, 26(10): 2723-2734.
[13]	. Approach to determine customer requirements weight based on network game [J]. , 2020, 26(10): 2792-2798.
[14]	. Asynchronous parallel selective disassembly sequence considering multi-targets [J]. , 2020, 26(7): 1749-1755.
[15]	. Customer satisfaction evaluation based on probabilistic linguistic information axiom [J]. , 2020, 26(7): 1868-1874.