面向精度分析的全语义产品模型研究

摘要/Abstract

摘要： 为了利用计算机技术辅助产品的精度设计，提出了计算机辅助精度分析的概念，阐述了其分类、内容和方法，并建立了一种面向狭义计算机辅助精度分析的3维产品模型——全语义产品模型。按照产品层次的不同，将该模型分为零件级和装配级两类，因而在构造不同类型的模型时需要附加不同层面的信息，并将这些信息转化为相应的邻接矩阵形式，存储在产品的相应模型文件中，这样，全语义产品模型弥补了基于特征设计的几何模型的缺陷，能够提供精度要求、尺寸公差、形位公差、表面粗糙度和装配约束关系等方面精度分析所需的信息，为实现计算机辅助精度分析提供基础模型。该模型已成功用于自主开发的计算机辅助精度分析系统中。

关键词: 全语义产品模型, 计算机辅助精度分析, 计算机辅助公差设计

Abstract: The definition, classification, content and method of Computer Aided Precision Analysis (CAPA) were put forward to take computer technology into precision design works. Facing narrow sensed CAPA, the 3D Full Semantic Product Model (FSPM) was constructed. According to the product’s different hierarchies, FSPM was classified as part level and assembly level, therefore different information should be defined for each kind of FSPM in model construction. And this information was transformed into relevant adjacent matrixes and stored into their corresponding model files. Compared with geometrical model based on features design, the FSPM could provide the information in compute aided precision analysis, such as precision demand, dimension and geometrical tolerance, surface roughness and assembly constraints. As the result, the FSPM could provide the basic model for CAPA and was successfully applied in the development of computer aided precision analysis system.

Key words: full semantic product model, computer aided precision analysis, computer aided tolerance design

中图分类号:

TG8
TP391

王恒，宁汝新. 面向精度分析的全语义产品模型研究[J]. .

WANG Heng， NING Ru-xin. Research on full semantic product model oriented to precision analysis[J]. .

参考文献

［1］ LIU Yusheng, GAO Shuming, WU Zhaotong, et al. Hierachical representation model and its realization of tolerance based on feature［J］. Chinese Journal of Mechanical Engineering, 2003,39(3)：1-7(in Chinese). ［刘玉生, 高曙明, 吴昭同, 等. 基于特征的层次式公差信息表示模型及其实现［J］. 机械工程学报, 2003,39(3)：1-7.］

[2] GAO Fei, YAN Junqi, MA Dengzhe, et al. A model of dimension-and-tolerance［J］. Journal of Computer-Aided Design & Computer Graphics, 1997,9(1)：87-92(in Chinese). ［高飞, 严隽琪, 马登哲, 等. 尺寸公差模型［J］. 计算机辅助设计与图形学学报, 1997,9(1)：87-92.］

[3] ZHANG Kaifu, LI Yuan, SHAO Yi, et al. Assembly-oriented tolerance semantic modeling［J］. Aeronautical Manufacturing Technology(Special Edition of Aviation CIMS), 2003,(4)：A42-A45(in Chinese). ［张开富, 李原, 邵毅, 等. 面向装配的容差语义建模技术［J］. 航空制造技术（航空CIMS专辑）, 2003,(4)：A42-A45.］

[4] PASUPATHY T M K, MORSE E P, WILHELM R G. A survey of mathematical methods for the construction of geometric tolerance zones［J］. Journal of Computing and Information Science in Engineering, 2003,3(1): 64-75.

[5] HU Jie, XIONG Guangleng, WU Zhaotong. Study on tolerance design based on variational geometric constrains network［J］. Chinese Journal of Mechanical Engineering, 2003,39(5)：20-26(in Chinese). ［胡洁, 熊光楞, 吴昭同. 基于变动几何约束网络的公差设计研究［J］. 机械工程学报, 2003,39(5)：20-26.］

[6] YAN Yan. Research on technologies and application of tolerance design in integrative environment of design and manufacturing［D］. Beijing：Beijing Institute of Technology, 2001(in Chinese) .［闫艳. 设计制造一体化环境下的公差设计技术与应用研究［D］.北京：北京理工大学，2001.］

[7] Pro/toolkit User’s Guide[Z]. Needham, USA：Parametric Technology Corporation，2001.