基于DCOM-MMS的可重配置机器人控制

摘要/Abstract

摘要： 为实现可重构机器人柔性装配单元中多机器人之间的互操作及重配置性能，将制造报文规范作为多机器人控制间传递的报文规范，在描述制造报文规范和分布式组件对象模型与公共对象请求代理体系结构等分布式对象技术的基础上，构建了基于分布式组件对象模型遵循制造报文规范机器人控制的通讯模型，建立了分布式机器人控制的软件和硬件体系结构，并利用面向对象的方法进行了机器人控制的设计。为了验证系统的设计方法的有效性，进行了原型系统的开发和测试。

关键词: 机器人柔性装配单元, 分布式组件对象模型, 制造报文规范, 串行通讯

Abstract: In order to implement the reconfigure ability and interoperability among multi-robots in Robot Flexible Assemble Cell (RFAC), Manufacturing Message Specification (MMS) was selected as the message specification communicated among the robots in RFAC. Firstly, MMS and distributed object technique was described. Secondly, an MMS followed communication model based on DCOM was set up, and a distributed robot control system including its software and hardware structure was developed. At last, the robot control system was designed using the object-oriented technique, and then a prototype was developed to testify the validity of the design method for the system.

Key words: robot flexible assemble cell, distributed component object model, manufacturing message specification, serial communication

中图分类号:

TP391

余传猛，周炳海，奚立峰. 基于DCOM-MMS的可重配置机器人控制[J]. .

YU Chuan-meng , ZHOU Bing-hai , XI Li-feng. Reconfigurable robot control based on DCOM-MMS[J]. .

参考文献

［1］ BULGAK A A，SANDERS J L. Samplers，modeling and design optimization of asynchronous flexible assembly systems with statistical process control and repair ［J］. International Journal of Flexible Manufacturing System（Historical Archive）, 1991,3(3-4):251-274.

[2] RAN Yuyao, RAN Xianglai. Reconstruction arithmetic for multi-robot used in assembly cell ［J］. Mechanical Design and Manufacturing Engineering, 2001,30(6):35-37（in Chinese）. ［冉宇瑶,冉祥来.可重构多机器人装配单元系统的重构算法及实现［J］. 机械设计与制造工程，2001，30（6）：35-37.］

[3] ZHANG Weixing, CHEN Weidong, QIN Zhiqiang.Design and realization of a multi-robot manufacturing system ［J］. Robot,2003,25(5):385-389（in Chinese）. ［张卫星, 陈卫东, 秦志强.一个多机器人制造系统的设计与实现［J］. 机器人，2003,25(5)：385-389.］

[4] TOSHIO F. Cell structure robotics system CEBOT: control, planning, and communication methods［J］. Robotics and Autonomous System，1991,7:239-248.

[5] YANG C O, GUAN T Y，LIN J S. Developing a computer shop floor control model for a CIM system-using object modeling technique ［J］. Computer in Industry, 2000, 41:213-238.

[6] WECK M, PETERS A. Component based control software for distributed manufacturing ［J］. Production Engineering，1999,6（2）:117-120.

[7] WU Q,DIVOUX T,LEPAGE F.Integrating multimedia communication into an MMS environment ［J］. Computer Communications,1999，22(10):907-918.

[8] CHEAH R S S, LEE B S, LIM R L. Design and implementation of an MMS environment on ISODE ［J］. Computer Communications, 1997, 20(15):1354-1364.

[9] JOHN P M, YAMIN W, TANG C K. The use of the virtual manufacturing device in the manufacturing message specification protocol for robot task control ［J］. Computer in Industry, 1996,28(2):123-136.

[10] BOON-CHEONG T, CHUTATTAPE O. MMS and interprocess communication for multiple robot assembly system ［A］. Proceedings of the IEEE International Symposium on Industrial Electronics［C］. USA:IEEE,1992.799-803.

[11] J.P.T.M, WANG Y. Integrated robot control based on Net-BIOS ［J］. Control Engineering Practice, 1993,1(6):971-978.

[12] IVICA C, MAGNUS L. Challenges of component-based development ［J］. The Journal of Systems and Software, 2002,61(3):201-212.

[13] ZHOU Binghai, XI Lifeng, CAO Yongshang. Component-based control software design for flexible manufacturing system ［J］. Journal of Donghua University, 2003, 20(1): 81-85.

[14] AHN G J. Role-based access control in DCOM ［J］. Journal of Systems Architecture, 2000,46(13):1175-1184.