计算机集成制造系统 ›› 2026, Vol. 32 ›› Issue (5): 1754-1769.DOI: 10.13196/j.cims.2024.0599

• • 上一篇    下一篇

基于数字孪生的联合收获机作业速度优化控制

郭大方1,吴志康1,杜岳峰1+,王林泽1,马若飞1,乔智2   

  1. 1.中国农业大学工学院
    2.中国农业大学信息与电气工程学院
  • 出版日期:2026-05-31 发布日期:2026-06-09
  • 作者简介:
    郭大方(1995-),男,山东临沂人,博士研究生,研究方向:智能装备数字孪生、智能控制技术、数据驱动进化计算等,E-mail:dafang.guo@cau.edu.cn;

    吴志康(2001-),男,山东济南人,硕士研究生,研究方向:智能装备数字孪生、机电液系统建模与控制、大田农业机器人等,E-mail:19811713970@163.com;

    +杜岳峰(1984-),男,山东泰安人,副教授,博士,研究方向:智能装备数字孪生、农业装备数字化设计、自动控制技术等,通讯作者,E-mail:dyf@cau.edu.cn;

    王林泽(1997-),男,河北沧州人,博士研究生,研究方向:智能装备数字孪生、电动无人动力装备、智能控制技术等,E-mail:b20233070657@cau.edu.cn;

    马若飞(1999-),男,甘肃兰州人,博士研究生,研究方向:智能装备数字孪生、智能控制技术、人工智能等,E-mail:b20243070727@cau.edu.cn;


    乔智(1990-),男,河北邢台人,讲师,博士,研究方向:计算机图形学、计算机视觉、深度学习、数字孪生等,E-mail:zhiqiao223@cau.edu.cn。
  • 通讯作者简介:杜岳峰(1984-),男,山东泰安人,副教授,博士,研究方向:智能装备数字孪生、农业装备数字化设计、自动控制技术等,通讯作者,E-mail:dyf@cau.edu.cn
  • 基金资助:
    国家自然科学基金资助项目(52175258);中国农业大学学科交融拓新计划资助项目。

Optimal control of working speed for combine harvesters based on digital twin

GUO Dafang1,WU Zhikang1,DU Yuefeng1+,WANG Linze1,MA Ruofei1,QIAO Zhi2   

  1. 1.College of Engineering,China Agricultural University
    2.College of Information and Electrical Engineering,China Agricultural University
  • Online:2026-05-31 Published:2026-06-09
  • Supported by:
    Project supported by the National Natural Science Foundation,China(No.52175258),and the Discipline Integration and Innovation Project of China Agricultural University,China.

摘要: 联合收获机作业工况复杂多样,传统PID控制方法在多变土壤条件下常出现控制性能下降与适应性不足的问题。为提升作业速度控制系统的动态适应能力和控制精度,提出一种基于数字孪生的联合收获机作业速度优化控制方法。首先,采用机理建模方法构建融合车辆动力学、轮土相互作用及液压系统模型的联合收获机数字孪生体,用于实时反映作业速度的动态响应。针对软土地面参数不确定性,提出基于神经网络识别与粒子群优化算法搜索的两阶段孪生体参数更新机制。随后,基于更新后的数字孪生体,利用大爆炸算法对PID控制器参数进行优化。最后,通过田间试验验证了数字孪生体的准确性、模型更新机制的有效性及优化控制方法的效果。结果表明,所提出方法在控制精度、响应速度和适应性方面均优于传统PID及模糊PID控制方法,能够改善联合收获机作业速度控制效果。

关键词: 数字孪生, 优化控制, 参数更新, 轮土互作

Abstract: The working conditions of combine harvesters are complex and variable.The traditional PID-based speed control method has poor adaptability and performance degradation under soft soil conditions.To address these challenges,an optimal control method for combine harvester working speed based on digital twin was proposed.A mechanism modeling method was adopted to construct a joint harvester digital twin that integrated vehicle dynamics,wheel soil interaction,and hydraulic system models,which applied to reflect the dynamic response of the operating speed.A two-stage parameter updating mechanism was developed to address the uncertainty of soft ground parameters,which combined neural network classification and particle swarm optimization algorithm.With the updated digital twin,the PID controller parameters were further optimized using the Big Bang-Big Crunch algorithm.Finally,field experiments were conducted to verify the accuracy of the digital twin,the effectiveness of the parameter updating mechanism,and the improvement in control performance.The results demonstrated that the proposed method significantly outperformed traditional and fuzzy PID controllers in terms of control precision,response time and adaptability,effectively improving the combine harvester's working speed control.

Key words: digital twin, optimal control, parameter update, wheel-soil interaction

中图分类号: